Audison Prima APS 8 R
8" 250Watt RMS 4-Ohm Subwoofer
With The Aim Of Providing High Acoustical Output Even When Used With Lower Power, The APS 8 R Was Designed For Use In An 8.5-Litres Reflex Enclosure, With Tuning Between 30 And 40Hz. The APS 8 R Has Been Specifically Developed To Be Combined With Either The AP8.9 Bit Or AP4.9 Bit / AP4 D. Prima Subwoofer Components Have Been Developed With A Primary Goal: To Deliver High Output In Tight Spaces. Output Is A Matter Of Excursion; The More Air The Cone Moves, The More Output. However Reduced Mounting Depth Traditionally Has Meant Low Excursion. Prima Subwoofers Employ A Special Cone-Dustcap-Basket Geometry Which Guarantees Large Excursion Of The Mobile Group, While Keeping The Mounting Depth To A Minimum. The Surround And Spider Have Been Carefully Designed To Prevent The “Rocking-Mode” Phenomenon. The Cooling Circuit Has Been Designed With Air Vents On The Basket Underneath The Spider, Eliminating The Need For Vents On The Bottom-Plate. This Allows The Subwoofer To Be Mounted Close To The Back Wall Of The Enclosure, Making The Most Of The Reduced Mounting Depth.
Technical Data
Comp
|
Single Coil Subwoofer
|
Size
|
200 Mm (8”)
|
Power Handling
|
250 W Continuous Power 500 W Peak Power
|
Impedance
|
4 Ω
|
Sensitivity
|
84 Db
|
Magnet
|
High Density Flux Ferrite
|
Cone
|
Water-Repellent Pressed Paper
|
Xmech
|
16,5 (0.65)
|