Search
Filters
Close

Kicker 44KXA400.4

Kicker 44KXA400.4 4 Channel Amplifier
SKU: 44KXA4004
*

(Is Required)

R 6 495.00

Kicker 44KXA400.4

4 Channel Amplifier

 

Powerful, Dependable, And Good-Looking

Kicker's KXA400.4 Four-Channel Amplifier Will Bring Brilliance And Clarity To Your Sound, Powering Your Front And Rear Speakers With 50 Watts RMS Each. This Reliable And Compact KX Series Rocker Will Run Cool Even When Pushed Hard, Thanks To Its High-Mass Heatsink, High-Tech Internal Components, And Efficient Full-Range Class-D Amp Technology. Building A Big System Piece-By-Piece? You Could Start By Using This Amp In 2-Channel Mode To Drive A Couple Subs With 200 Watts Each, And Then Later Switch The Amp Back To 4-Channel In Order To Power Your Front And Rear Speakers When You Get A Bigger Amp For The Sub.

Connection Perfection

Kicker Employs Their Fail-Safe Integration Technology (FIT2™) To Reject Noise And Stop Any Interference Generated By Your Car's Electronics, So You'll Enjoy Your Music Clean And Pure. Speaker-Level Inputs Make It Possible To Hook This Amp Up To Almost Any Stereo, Even A Factory System. Kicker Also Helps You Set This Amp's Gain Properly, By Offering Free Test Tones For Downloading. You Play A Tone And Turn The Gain Up Until The Gain Knob Glows Red. Then, You Turn It Down Until It Just Goes Out, And The Amp's Gain Is Set Perfectly.

Versatile Controls Behind The Folding Door

A Folding Door Gives You Easy Access To Your Amp's Controls. You Can Tune For Almost Any Kind Of Speaker, As The Steeply-Sloped High- And Low-Pass Filters Offer A Wide Range Of Adjustment. The Filter Section For The Amp 2 Channels Can Be Set Up For Bandpass Operation — Where Both The High- And Low-Pass Filters Are Engaged To Allow Only The Frequencies Between Them To Play — For Optimizing The Signal For Midrange Speakers In A 3-Way System.

 

Product Highlights:

  •         4-Channel Car Amplifier
  •         50 Watts RMS X 4 At 4 Ohms (100 Watts RMS X 4 At 2 Ohms)
  •         200 Watts RMS X 2 Bridged At 4 Ohms (4-Ohm Stable In Bridged Mode)
  •         CEA-2006 Compliant
  •         Class D Amp Technology
  •         Gain Knobs Also Function As Clip Lights
  •         Amp1:

o   Variable High- Or Low-Pass Filter (10-5000 Hz, 24 Db/Octave)

  •         Amp 2:

o   Variable High-Pass Filter (10-500 Hz, 24 Db/Octave)

o   Variable Low-Pass Filter (40-5000 Hz, 24 Db/Octave)

o   Bandpass Engages Both High- And Low-Pass Filters

  •         Variable Bass Boost (0-18 Db At 40 Hz) On All Channels

More Features:

  •         Front-Mounted Controls Protected Behind Fold-Down Door
  •         Fail-Safe Integration Technology Eliminates Noise From Your Vehicle's Electrical System
  •         Radio Detect Switch For Receivers That Need Speaker Loads On Their Outputs
  •         Preamp And Speaker-Level Inputs (Speaker Wire To RCA Adapter Required For Speaker-Level Input)
  •         Preamp Outputs
  •         Wiring, Fuse, And Hardware Not Included With Amplifier

o   4-Gauge Power And Ground Leads And A 100-Amp Fuse Recommended

  •         Dimensions: 11-1/4"W X 2-3/16"H X 8-1/8"D

 

Kicker 44KXA400.4

4 Channel Amplifier

 

Powerful, Dependable, And Good-Looking

Kicker's KXA400.4 Four-Channel Amplifier Will Bring Brilliance And Clarity To Your Sound, Powering Your Front And Rear Speakers With 50 Watts RMS Each. This Reliable And Compact KX Series Rocker Will Run Cool Even When Pushed Hard, Thanks To Its High-Mass Heatsink, High-Tech Internal Components, And Efficient Full-Range Class-D Amp Technology. Building A Big System Piece-By-Piece? You Could Start By Using This Amp In 2-Channel Mode To Drive A Couple Subs With 200 Watts Each, And Then Later Switch The Amp Back To 4-Channel In Order To Power Your Front And Rear Speakers When You Get A Bigger Amp For The Sub.

Connection Perfection

Kicker Employs Their Fail-Safe Integration Technology (FIT2™) To Reject Noise And Stop Any Interference Generated By Your Car's Electronics, So You'll Enjoy Your Music Clean And Pure. Speaker-Level Inputs Make It Possible To Hook This Amp Up To Almost Any Stereo, Even A Factory System. Kicker Also Helps You Set This Amp's Gain Properly, By Offering Free Test Tones For Downloading. You Play A Tone And Turn The Gain Up Until The Gain Knob Glows Red. Then, You Turn It Down Until It Just Goes Out, And The Amp's Gain Is Set Perfectly.

Versatile Controls Behind The Folding Door

A Folding Door Gives You Easy Access To Your Amp's Controls. You Can Tune For Almost Any Kind Of Speaker, As The Steeply-Sloped High- And Low-Pass Filters Offer A Wide Range Of Adjustment. The Filter Section For The Amp 2 Channels Can Be Set Up For Bandpass Operation — Where Both The High- And Low-Pass Filters Are Engaged To Allow Only The Frequencies Between Them To Play — For Optimizing The Signal For Midrange Speakers In A 3-Way System.

 

Product Highlights:

  •         4-Channel Car Amplifier
  •         50 Watts RMS X 4 At 4 Ohms (100 Watts RMS X 4 At 2 Ohms)
  •         200 Watts RMS X 2 Bridged At 4 Ohms (4-Ohm Stable In Bridged Mode)
  •         CEA-2006 Compliant
  •         Class D Amp Technology
  •         Gain Knobs Also Function As Clip Lights
  •         Amp1:

o   Variable High- Or Low-Pass Filter (10-5000 Hz, 24 Db/Octave)

  •         Amp 2:

o   Variable High-Pass Filter (10-500 Hz, 24 Db/Octave)

o   Variable Low-Pass Filter (40-5000 Hz, 24 Db/Octave)

o   Bandpass Engages Both High- And Low-Pass Filters

  •         Variable Bass Boost (0-18 Db At 40 Hz) On All Channels

More Features:

  •         Front-Mounted Controls Protected Behind Fold-Down Door
  •         Fail-Safe Integration Technology Eliminates Noise From Your Vehicle's Electrical System
  •         Radio Detect Switch For Receivers That Need Speaker Loads On Their Outputs
  •         Preamp And Speaker-Level Inputs (Speaker Wire To RCA Adapter Required For Speaker-Level Input)
  •         Preamp Outputs
  •         Wiring, Fuse, And Hardware Not Included With Amplifier

o   4-Gauge Power And Ground Leads And A 100-Amp Fuse Recommended

  •         Dimensions: 11-1/4"W X 2-3/16"H X 8-1/8"D