Search
Filters
Close

sE Electronics DM2

sE Electronics DM2 Active In-Line Microphone Preamplifier
SKU: DM2
*

(Is Required)

Call for pricing

sE Electronics DM2

 

The DM2 TNT Active In-Line Microphone Preamplifier From Se Electronics Is Intended To Be Inserted Between A Passive Ribbon Or Dynamic Microphone And A Microphone Preamplifier (Sold Separately) To Provide Gain For The Microphone Signal. A Switch Allows You To Select Between 15 And 30 Db Of Gain To Boost The Audio Signal, Improving The Level To Your Preamp, Mixer, Or Audio Interface Without Adding Noise Or Coloring The Sound.

The DM2 Offers Eight Load-Impedance Settings, Allowing You To Properly Match Your Microphone And Preamp Combination And Find The Sweet Spot For Optimal Results. The Sophisticated Class-A Design And High-Grade Fets Provide Clean Gain With Low Self-Noise. The Active Preamp Requires 48V Phantom Power For Operation And Is Built With A Dedicated Output Buffer Amplifier That Reduces RF Interference, Buzz, And Hum While Allowing It To Drive Long Cable Runs. Additionally, The DM2 Offers A Roadworthy, Slim, All-Metal Design, Ensuring Reliable Operation For Onstage Applications In Difficult Environments.

 

Note:

Not Suitable For Phantom-Powered Microphones (Condenser Microphones, Active Ribbon Microphones)

Switchable, Clean, And Consistent Gain From Moderate +15 Db To Explosive +30 Db

Designed For Neutral, Balanced Sound Quality With Minimal Noise

Explore Eight Impedance Settings Ranging From An Unconventionally Low 50 Ohms To Stunningly High 10 Megohms To Match Your Preamp With Any Mic Accurately

Two Gain Levels For Even Higher Flexibility On Various Sources

Ruthlessly Boosts The Signal Independent From Load Impedance Or Cable Length

High-Grade Fets Provide Supremely Low Noise

Requires 48V Phantom Power

Use Only With Passive Dynamic Or Ribbon Microphones

sE Electronics DM2

 

The DM2 TNT Active In-Line Microphone Preamplifier From Se Electronics Is Intended To Be Inserted Between A Passive Ribbon Or Dynamic Microphone And A Microphone Preamplifier (Sold Separately) To Provide Gain For The Microphone Signal. A Switch Allows You To Select Between 15 And 30 Db Of Gain To Boost The Audio Signal, Improving The Level To Your Preamp, Mixer, Or Audio Interface Without Adding Noise Or Coloring The Sound.

The DM2 Offers Eight Load-Impedance Settings, Allowing You To Properly Match Your Microphone And Preamp Combination And Find The Sweet Spot For Optimal Results. The Sophisticated Class-A Design And High-Grade Fets Provide Clean Gain With Low Self-Noise. The Active Preamp Requires 48V Phantom Power For Operation And Is Built With A Dedicated Output Buffer Amplifier That Reduces RF Interference, Buzz, And Hum While Allowing It To Drive Long Cable Runs. Additionally, The DM2 Offers A Roadworthy, Slim, All-Metal Design, Ensuring Reliable Operation For Onstage Applications In Difficult Environments.

 

Note:

Not Suitable For Phantom-Powered Microphones (Condenser Microphones, Active Ribbon Microphones)

Switchable, Clean, And Consistent Gain From Moderate +15 Db To Explosive +30 Db

Designed For Neutral, Balanced Sound Quality With Minimal Noise

Explore Eight Impedance Settings Ranging From An Unconventionally Low 50 Ohms To Stunningly High 10 Megohms To Match Your Preamp With Any Mic Accurately

Two Gain Levels For Even Higher Flexibility On Various Sources

Ruthlessly Boosts The Signal Independent From Load Impedance Or Cable Length

High-Grade Fets Provide Supremely Low Noise

Requires 48V Phantom Power

Use Only With Passive Dynamic Or Ribbon Microphones